Email Us

Stainless Steel Valves (Threaded, BW, SW End)

Stainless steel valves are widely used in chemical, petrochemical, petroleum, paper making, mining, electric power, liquefied gas, food, pharmaceutical, water supply and drainage, municipal, mechanical equipment supporting, electronic industry, urban construction and other fields. Valve is a control component in the pipeline fluid conveying system, it is used to change the path section and medium flow direction, with diversion, cut-off, regulation, throttling, check, shunt or relief pressure and other functions.


Different Types of Stainless Steel Valves

Stainless Steel Valves (Threaded, BW, SW End) Technical Specifications

RatingInchDNUnitDLWH
1000 WOG1/2"15mm157310554
3/4"20mm208210563
1"25mm259012563
1-1/4"32mm3211214084.5
1-1/2"40mm3812016293
2"50mm49146162101.5
2-1/2"65mm65177215120
3"80mm80205224125
4"100mm100265251180


Advantages of Stainless Steel Valves (Threaded, BW, SW End)

1. Easy to operate, open and close quickly, from full open to full close as long as rotation 90°, easy to remote control.

2. Convenient maintenance, valve structure is simple, sealing ring is generally active, disassembly and replacement are more convenient.

3. Wide range of application, diameter from small to a few millimeters, large to a few meters, from high vacuum to high pressure can be applied.     

Application of Stainless Steel Valves (Threaded, BW, SW End)

When it comes to stainless steel valves, we will think of these in the most common water pipe, whether it is water pipe, pump room, or wastewater treatment, or gas pipeline, etc., will be applied to stainless steel valves, which can well control the reasonable transmission of medium.For example, the delivery of water, the use of stainless steel valves, can prevent the impact of water hammer vibration, reasonable transport of water into the home.No matter what kind of industry equipment is used, its durability is very good, no corrosion, not easy to rust, good texture feel, is light industry, heavy industry, food equipment, water system, steam system quality valve, safety, stability, environmental protection.

Stainless Steel Valves (Threaded, BW, SW End) Installation

Q Stainless Steel Valves (Threaded, BW, SW End) Installation1
A.

Remove the protection cover on both sides of the flange end, and wash the valve when it is completely open.

Q Stainless Steel Valves (Threaded, BW, SW End) Installation2
A.

Flush and clear pipe of remaining impurities (which may damage seats and balls) prior to connection.

Q Stainless Steel Valves (Threaded, BW, SW End) Installation3
A.

 During installation, please do not use the actuator part of the valve as the lifting point to avoid damage to the actuator and accessories.

Q Stainless Steel Valves (Threaded, BW, SW End) Installation4
A.

This kind of valve should be installed in the horizontal direction or vertical direction of the pipeline.

Q Stainless Steel Valves (Threaded, BW, SW End) Installation5
A.

The pipeline near the installation point shall not be low or bear external forces, and the pipe support or support can be used to eliminate the deviation of the pipeline.

Q Stainless Steel Valves (Threaded, BW, SW End) Installation6
A.

After connecting with the pipe, please cross lock the flange connecting bolt with the specified torque.

Contact us